In modern road infrastructure, visibility and early warning are essential elements for accident prevention. Information indicator G2 Passage of pedestrians with LED lamps and power supply from 230V electric network, with accumulator 18 Ah is specially designed to significantly increase the level of safety in the intensive pedestrian areas.
This system light road signs for pedestrian crossings combines classic reflective signaling with high visibility intermittent LED technology. The result is an extremely visible road sign, both during the day and at night or under difficult weather conditions.
Commonly used in urban road safety, municipal infrastructure, urban mobility projects and upgrading pedestrian crossings, this indicator contributes directly to reducing the risk of accidents and increasing the attention of drivers.
Built according to European and Romanian road signs standards, the indicator is made of durable materials and includes two flashing LED warning lamps, feed from the electrical network 230V, with backup through accumulator 18 Ah for continuous operation.
By this combination of LED technology, stable power supply and energy autonomythe product becomes a professional solution for public administrations, road infrastructure companies, road builders and smart city projects.
What is the G2 indicator for pedestrian crossing and why it is so important
Road indicator G2 – Passage of pedestrians is an information indicator used to signal to drivers the existence of a pedestrian crossing. It is located close to the pedestrian marking to increase the attention of drivers and to protect vulnerable traffic participants.
In the modern version with flashing LED lampsThe indicator becomes much more effective. Light flashes immediately attract the attention of drivers, even from great distances, contributing to speed reduction and increased vigilance.
In practice, such systems are installed in particular in high-risk areas:
- Passages of non-separate pedestrians
- Approaching schools and gardens
- resident areas
- intensive intersections
- commercial or tourist areas
- national and county roads
By integrating LED technology and a stable electrical system, the indicator becomes a key component in modern road safety projects.
LED warning system – maximum visibility in traffic
One of the most important features of this indicator is the integrated system of LED flashing warning lamps.
The indicator shall be equipped with:
- two LED lamps located in the upper corners
- diameter approximately 100 mm
- Power LEDs for maximum visibility
- flashing warning light
Each lamp contains multiple high-intensity LEDs, allowing light to be detected even from large distances or under weak lighting conditions.
Bright flashes create a visual effect that instantly attracts the attention of drivers. Especially at night, when the contrast is high, these signals can be observed much earlier than a classic reflector.
This dual signalling — visual and luminous significantly increases the level of safety in the pedestrian crossing area.
Stable power supply on 230V power grid
Unlike solar-powered variants or public lighting, this model uses direct power supply from 230V power grid, which offers more technical advantages.
Advantages of grid power:
- stable operation regardless of weather conditions
- constant performance of the LED system
- elimination of solar light dependence
- unlimited operating time
- reduced maintenance
In urban or peri-urban areas where electricity is available, 230V is one of the safest and most reliable road signalling solutions.
This type of power supply allows the LED system to function continuously, without the risk of battery discharge during periods of low light.
Accumulator 18 Ah for autonomy and energy safety
In order to ensure the operation of the system even in the event of power outages, the indicator shall be equipped with high capacity accumulator – 18 Ah.
The role of the accumulator is to provide temporary energy autonomy, so that the light signal continues to function even if the power supply on the grid is interrupted.
Benefits of the integrated accumulator:
- automatic energy backup
- Operation in case of power failure
- stabilisation of the LED system power supply
- increasing system reliability
In road infrastructure projects, this energy redundancy is extremely important because Road safety should never be compromised by a temporary interruption of electricity.
Robust construction for outdoor use
The indicator is designed for permanent outdoor use and for resistance in difficult weather conditions.
The indicator housing shall be made of:
- steel board of a thickness of approximately 1 mm
- edge-rigiding
- anti-rozotic treatment
- Electrostatic field paint with polyester paint for outdoors
These features offer high durability and excellent resistance to:
- rain
- UV radiation
- powder
- Extreme temperatures
- Corrosion
The indicator is designed to withstand years of intensive operation.
High Performance Reflective Sheet
The area of the indicator shall be covered by: certified road reflecting leaflets, which complies with European standards for signalling.
Characteristics of reflecting foil:
- high reflectivity
- excellent visibility at night
- UV resistance
- long life
Reflective foil allows the display of the indicator even when LED lights are off or when the signal is observed in the light of the vehicle headlamps.
This ensures double visual redundancy:
- Headlight reflection
- LED warning
Standard dimensions for optimal visibility
The indicator shall be carried out in accordance with the standard dimensions established by the road signalling rules.
The usual size is:
850 × 850 mm
This dimension provides an ideal balance between:
- visibility
- legibility
- legislative compliance
The indicator shall comply with the technical requirements for symbols, colours and dimensions set out in European and national standards for road signs.
Compliance with European and Romanian standards
The indicator shall be carried out in accordance with the main road signalling standards:
- SR 1848-1,2,3 / 2011
- SR EN 12899-1 / 2007
These standards shall cover:
- dimensions of indicators
- colours and symbols
- material used
- Reflective performance
- conditions of resistance and durability
Compliance with these standards ensures that the indicator can be used in proiecte publice, lucrări de infrastructură și achiziții SEAP/SICAP.
Fast installation on signalling posts
The indicator is designed for simple and fast installation.
The assembly system shall include:
- Catching clamps
- zinc-plated screws
- Anti-rozotic fastening element
The assembly can be carried out on:
- Metal poles
- lighting posts
- Existing infrastructure
The system is compatible with posts with the usual diameter of up to 60 mm, used in most road signalling projects.
Where the G2 LED indicator is used
This type of indicator is used in many road safety projects:
Urban areas
- agglomerated intersections
- Intense circulation of boulevards
- pedestrian areas
School areas
- schools
- Kindergarten
- university campuses
Commercial areas
- shopping malls
- tourist areas
- parks
Road infrastructure
- national roads
- Roads of the county
- municipal roads
Commercial benefits for customers
- increases the visibility of pedestrian crossings
- reduces the risk of accidents
- effective light warning
- stable operation at 230V
- autonomy due to the 18Ah accumulator
- Quick installation
- compliance with road standards
- long-term
- Low maintenance cost
- ideal solution for public projects
FAQ – Frequently Asked Questions
What is the role of the LED G2 indicator for pedestrian crossings?
LED indicator G2 warns drivers of the existence of a pedestrian crossing through visual and luminous signalling, significantly increasing its visibility.
How does 230V power work?
The indicator is connected to the standard 230V power grid, which ensures the constant operation of LED lamps and eliminates dependence on solar energy.
What's the role of the 18 Ah accumulator?
The accumulator provides temporary autonomy for the LED system in the event of a power failure, maintaining active signaling.
Does the indicator meet road standards?
Yeah. The indicator shall be carried out in accordance with the SR 1848 and SR EN 12899 standards for road signalling.
Can it be mounted on any post?
Yes, the indicator can be mounted on most signalling pillars or illuminated with standard diameter.
Is it visible at night?
Yeah. The indicator is equipped with reflective foil and intermittent LED lamps for maximum visibility.