The safety of pedestrians is one of the most important priorities in modern road infrastructure. Road indicator G1 pedestrian crossing with LED lamps and power supply from 230V power grid, without accumulator is specially designed to increase the visibility of pedestrian crossings and to warn drivers of time on high-risk crossing areas.
This type of road sign illuminated for pedestrian crossing is frequently used in busy urban areas, close to schools, hospitals, shopping centres or intersections with reduced visibility. By integrating High intensity intermittent LED lamps, the indicator becomes visible from a high distance, including in difficult weather conditions or at night.
The system works through direct power supply to 230V power grid, eliminating the need for a battery and providing a stable, sustainable and efficient energy solution for professional road signalling projects.
Built in accordance with European and national standards for road signalling, the indicator provides maximum visibility, operating resistance and compliance with technical rules for road infrastructure.
What is the road sign G1 with LED for pedestrian crossing
Road indicator G1 Passage of pedestrians with LED lamps is a sign of information used to signal areas where pedestrians can legally and safely cross the carousel.
Its role is twofold:
- informează conducătorii auto asupra existenței trecerii de pietoni
- draws additional attention through intermittent light signaling
LED lamps located at the top of the indicator emit intermittent light, growing considerably visibility of the indicator at night or under reduced visibility.
This type of indicator is frequently installed in:
- urban agglomerated areas
- Passages of non-separate pedestrians
- Approaching schools and gardens
- commercial and residential areas
- Intersections with intense traffic
By integrating the LED system, the indicator becomes a active element of road safetyNot just a simple information board.
LED warning system – maximum visibility for drivers
One of the most important features of this indicator is the Flashing LED warning lamps.
High intensity LED lamps
The indicator shall be equipped with:
- two LED lamps mounted in the upper corners
- approx. lamp diameter 100 mm
- each lamp contains 32 Power LEDs
This configuration ensures:
- high visibility over long distances
- rapid detection of pedestrian crossing by drivers
- efficient signalling including in conditions of rain, fog or low light
Intermittent light increases driver reaction time
Intermittent light is perceived much faster by drivers than a static indicator.
Therefore, this type of indicator:
- reduces the risk of accidents
- increase driver's attention
- signal areas with high pedestrian crossing potential
Direct power supply to the 230V power grid
The indicator is designed for direct power supply to 230V power grid, which offers more important operational advantages.
Stable and permanent operation
By direct power supply to the network:
- LED system works permanently
- does not depend on solar accumulators or solar panels
- does not require periodic battery maintenance
This is ideal for:
- urban areas with existing electricity infrastructure
- Permanent signalling projects
- systems integrated into public lighting.
Removal of maintenance costs for the accumulator
Models without accumulator are preferred in many projects because:
- Reduce maintenance costs
- eliminates the risk of battery degradation
- provides longer lifespans for the system.
Robust construction for outdoor use
The indicator is designed for operation under difficult conditions of environment and traffic.
Panel made of galvanized steel
The structure of the indicator shall be carried out from galvanized steel board with thickness of approximately 1 mm, offering:
- High mechanical strength
- anti-rozotic protection
- long-term exploitation outside.
Continuous bordering for stiffness
The panel is rigidized by bordering throughout the perimeter, including in the corner area.
This ensures:
- Vibration resistance
- structural stability
- maintaining the shape over time.
Electrostatic paint for additional protection
The structure of the indicator shall be protected by: Polysteric powder paint applied in electrostatic field, ideal for outdoor use.
Benefits include:
- weather resistance
- UV protection
- increased sustainability.
Reflective leaflet for night vision
In addition to LED lighting, the indicator is equipped with certified reflective sheet for road signs.
This complies with the standard requirements SR 1848/2011, being designed for:
- strong reflection of the light of the headlamps
- visibility at night
- rapid identification of the indicator.
Folia includes Integrated Identification Marking, confirming the authenticity and conformity of the reflecting material.
The duration of the marking shall be equal to the lifetime of the reflective sheet.
Compliance with European and national standards
The indicator shall be carried out in accordance with the technical rules for road signs:
- SR 1848/2011 – standard for road signs
- SR EN 12899-1/2007 – European standard for permanent road signs.
The products shall be accompanied by:
- certificate of conformity
- certificate of constancy of performance
- Declaration of performance for the LED system.
These documents are essential for road infrastructure projects, public tenders or works to modernise traffic networks.
Simple and safe mounting system
The indicator is designed for quick installation on support posts.
The fixing shall be effected by:
- zinc-plated screws
- Zinc-plated sheaths and sheaths
- corrosion-resistant clamping system.
Indicator does not include mounting pole, it is selected separately according to the infrastructure project.
Where the G1 LED indicator is used
This type of road sign bright for pedestrian crossings is used in many infrastructure applications.
Agglomerated urban areas
Ideal for boulevards, intersections and commercial areas.
Closeness of education units
Increases the safety of students in schools and kindergartens.
Hospitals and medical centres
Signal areas with intense pedestrian traffic.
Road infrastructure modernisation projects
Used in smart city projects and increasing traffic safety.
Areas with reduced visibility
Curves, intersections or roads with weak lighting.
Commercial benefits for the customer
- Significant increase visibility of pedestrian crossings
- Reduces the risk of Road accident
- Warn drivers of time through intermittent LED lights
- Permanent operation through 230V power supply
- Reduced maintenance costs (without batteries)
- Durable construction for long-term outdoor use
- Respect European and national standards
- Simple installation on existing infrastructure
- Ideal solution for Road safety projects
FAQ – Frequently Asked Questions
What is the road sign G1?
The G1 indicator is a sign of information indicating a pedestrian crossing on the roadway.
What is the role of LED lamps on the indicator?
The LED lamps emit intermittent light to attract attention to the drivers and increase the visibility of the indicator.
Does the indicator work without a battery?
Yeah. This model is powered directly to the 230V power grid and does not require a battery.
Where does the G1 LED display stand?
It shall be installed prior to pedestrian crossings, in particular in areas with heavy traffic or reduced visibility.
Does the indicator meet road standards?
Yeah. The indicator is performed according to the standards SR 1848/2011 and SR EN 12899-1/2007.
Is the mounting pole included?
In general, the pillar is not included and is purchased separately.