In any road work area, correct organisation of traffic It is not only a legal requirement, but also a direct responsibility for the safety of drivers, workers and all traffic participants. Directional beacon signalling works 800x200 mm, right occolire, foil Class 1 is designed exactly for this role: to offer visibility, orientation and control of traffic flow in temporary areas of restriction or diversion.
This type of Road signalling beacon for works is widely used in road construction, road repairs, infrastructure works or temporary interventions on public roads. With a simple but extremely efficient design, the beacon clearly indicates the direction of right-hand bypass, reducing traffic confusion and preventing dangerous situations.
Standard size 800x200 mm offers the ideal balance between visibility and manoeuvrability, again Reflective foil Class 1 ensure the rapid recognition of both daytime and nighttime alerts.
The role of the directional beacon in organising traffic at work
During roadway work, traffic must be reorganized temporarily to allow safe operation. In such situations, directional markings for bypass they become some of the most important elements of temporary signalling.
Mark with right bypass transmits a clear visual message:
traffic must be redirected to the right side in order to avoid the working area.
This signaling is essential for:
- organisation of road traffic flows
- the delimitation of hazardous areas
- protection of workers' teams
- reducing the risk of accidents
- guidance of vehicles on temporary routes
In the absence of such indicators, drivers would have to react instinctively, and under intense traffic conditions this may lead to sudden braking, risky gang changes and accidents.
Construction of the directional beacon for road works
Optimised dimensions for visibility
The beacon has the dimension 800x200 mm, one of the most used in the temporary signalling of road works.
This dimension offers:
- good distance visibility
- quick reading of the directional symbol
- easy integration into modular signalling systems
- compatibility with heavy bases or mobile supports
The rectangular shape of the marker allows clear application of the directional arrows, the main element indicating the direction of circumvention.
Reflective leaf Class 1
A key element of the beacon is Reflective foil Class 1, which increases visibility under low lighting conditions.
This sheet reflects the light of the vehicle headlamps, which allows drivers to observe the beacon remotely even if:
- at night
- in rain conditions
- in fog or reduced visibility
- in light-enlightened areas
Main characteristics of the foil Class 1:
- high reflectivity
- durability under varied weather conditions
- UV resistance
- keeping colors in time
Resistant structure for outdoor use
The beacon is made of materials resistant to intensive use in the outside environment.
The materials used shall ensure:
- resistance to mild impacts
- stability under wind conditions
- long duration of operation
- minimum maintenance
The construction is also designed for quick mounting on Heavy base for beacons, frequently used in the temporary organisation of traffic.
High visibility for drivers
Visibility is the key criterion in any temporary road signalling system.
The directional mark for work is designed to be quickly observed due to:
- strong contrast of colors
- simple and intuitive design
- clear directional arrows
- Reflecting foil
Drivers must be able to interpret the signal in fractions of a secondand the design of this beacon is optimized precisely for this.
Common use of the directional beacon
Temporary road works
Most commonly, the beacon is used in:
- repair of the carousel
- asphalting
- road upgrades
- infrastructure works
In such situations, the beacon indicates bypassing the working area to the right.
Urban construction
In cities, works occur frequently in:
- intersections
- areas of use
- Road and sidewalk
- Network modernisations
The beacon helps to maintain an organised traffic flow even in crowded areas.
Emergency assistance
The beacon may also be used in temporary situations such as:
- intervention on utility networks
- maintenance work
- Road accident
- temporary blocking
Compatibility with temporary signalling systems
The directional marker 800x200 mm is designed to operate with other signalling equipment.
It is usually used together with:
- Heavy base for beacons
- signalling cones
- Warning lamps for works
- Delimiting fencing
- Temporary signalling panels
This integration allows the creation of a complete system of traffic management in work areas.
Quick assembly and easy transport
An important advantage of this beacon is Quick installation.
The work teams can mount the beacon in just a few seconds, using a stable base or compatible support.
Benefits for intervention teams:
- Mounting without special tools
- easy transport in intervention vehicles
- rapid handling
- rapid reorganisation of the signaling
These features are essential in the yards where reaction time is critical.
Durability under intensive operating conditions
The markings used in road works are constantly exposed to:
- intensive traffic
- variable weather conditions
- common handling
- UV radiation
Materials used for this beacon shall be selected to withstand such conditions by maintaining the visibility and integrity of the structure in the long term.
Commercial benefits for companies and authorities
• efficient organisation of traffic in working areas
• reducing the risk of accidents
• High visibility for drivers
• quick and easy assembly
• low maintenance cost
• compatibility with standard signalling equipment
• durability in intensive use
FAQ – Frequently asked questions about directional beacons for work
What does the directional beacon indicate with the right bypass?
This indicates to drivers that they must bypass the working area on the right side, avoiding the obstacle or temporary restriction.
Where are directional beacons used for work?
They are used in road yards, infrastructure works, temporary roadside interventions and temporary traffic organisations.
What is a Class 1 reflective sheet?
The Class 1 Reflective Sheet is a special material that reflects the light of the headlamps, increasing the visibility of the signal at night or under conditions of reduced visibility.
How do you mount the directional beacon?
The beacon usually mounts on a Heavy base for beacons, which ensures stability in traffic and wind conditions.
Is it weather resistant?
Yeah. The materials used are resistant to rain, UV radiation and variable temperatures.
Can it be used at night?
Yeah. Thanks to the reflective foil, the beacon is visible in the light of the vehicle headlamps.