Red-yellow-green ELBA 3S2-TL-LED/PC is a professional solution of Road traffic driving at intersections, designed for modern urban infrastructure and high-reliability traffic control systems. This Three-color LED light light – red, yellow and green is developed by the Romanian manufacturer ELBA and is designed for continuous operation under difficult environmental conditions, with Optimum visibility and reduced energy consumption.
Built based on the platform Traffic Leader, model 3S2-TL-LED/PC integrate High-performance LED technology, UV-resistant housing and stringent European standards for road signalling. In practice, this type of traffic light is widely used in urban intersections, national roads, road works or intelligent traffic management systems, where clear and rapid transmission of information to traffic participants is essential.
From robust construction to optical performance certified to European standards, ELBA 3S2-TL-LED/PC is a strategic choice for local administrations, road infrastructure companies, ITS integrators and road signalling companies.
What is the red-yellow-green ELBA 3S2-TL-LED/PC traffic light
ELBA 3S2-TL-LED/PC red-yellow-green light is a lighting body for driving road traffic, consisting of three separate compartments – red, yellow and green – each equipped with High efficiency LED modules.
The diameter of the light surface is Ø200 mm, which assures a excellent visibility for drivers, including in conditions of strong light or rain.
The housing is made of Polycarbonate (PC) or UV-resistant ABS, and the optical set is designed to comply with strict requirements for the intensity and uniformity of light set by European standards for traffic lights.
In practice, this type of traffic light is used in:
- urban intersections
- intelligent traffic control systems
- areas with intense vehicle flows
- Modernised road infrastructure
- urban mobility projects
Construction of the traffic light – components and technical design
The reliability of a traffic light depends directly on the quality of its components. Model ELBA 3S2-TL-LED/PC is built modular for durability, simple maintenance and durability.
UV resistant polycarbonate housing
The body of the traffic light is manufactured from Technical plastic material (ABS or PC), designed to withstand:
- intense UV radiation
- high temperature variations
- rain and humidity
- dust and urban pollution
This construction offers High mechanical strength and dimensional stability, even after years of use in the outside environment.
Front door with polycarbonate dispersion
Each compartment is provided with a polycarbonate front door, equipped with:
- coloured disperser (red, yellow, green)
- cozoroc for reducing reflexes
- secure locking system
The door opening is only done with Special Enbus keywhich prevents unauthorised access and protects internal components.
High-performance LED optical module
The LED optical element is mounted on the door of the light and offers:
- uniformly distributed light
- Low energy consumption
- extended life span
LED technology eliminates the need for frequent change of filament lamps and reduces maintenance costs.
Optical performance and visibility in traffic
The visibility of the traffic light is essential for traffic safety. Model 3S2-TL-LED/PC comply with the European standard SR EN 12368, which defines the optical performance of traffic lights.
This standard establishes key parameters such as:
- luminous intensity
- light uniformity
- field of colour
- phantom effect
Distribution of luminous intensity
The traffic light offers Photometric distributions W and N, which ensures optimal visibility for different angles of observation.
Classification LED intensity
The luminous performance for each colour shall be certified as follows:
- red mode: B2/2 and B3/1
- yellow module: B3/2 and B2/2
- Green module: B2/2 and B3/1
These classifications indicate High visibility and chromatic stability, even in direct sunlight.
Minimum phantom effect
The phantom effect occurs when the external light creates the false impression that the light is lit. ELBA model is classified Class 5 for phantom effect, which means clear visibility without confusion for drivers.
Resistance to extreme environmental conditions
The light is designed for permanent external operationNo matter what weather conditions.
Operating temperature range
The system shall be certified for operation between:
-40°C and +60°C
This performance makes it suitable for:
- continental climate
- mountain areas
- regions with high temperature variations
IP protection level
- IP65 for LED optical module
- IP56 for the body of the traffic light
These values shall ensure protection against:
- Of dust
- water jets
- Heavy rains
Resistance to mechanical shocks
The light is tested according to the classes IR2 – IR3, which indicates a high resistance to accidental impacts or vibrations traffic.
Installation and installation on road infrastructure
Installation of the traffic light ELBA 3S2-TL-LED/PC is designed to be fast and safe.
The traffic light is mounted on Stimulating posts through dedicated connections.
The records shall include:
- M8 screw holes
- fixing channel with a platform of up to 10 mm
- top connection for electrical connection
This system allows the installation both in permanent intersections, and in temporary road signalling systems.
European standards and conformity
The traffic light complies with the most important standards for road signalling equipment.
Standard traffic lights
SR EN 12368
This standard defines:
- luminous intensity
- uniformity
- signal colors
- optical performance
Standard lighting bodies
SR EN 60598-1
The standard confirms electrical safety and construction quality.
European Directives complied with
- Low Voltage Directive
- Directive on electromagnetic compatibility
- RoHS Directive
- Directive DEEE
These certifications ensure that the product is suitable for public projects and European road infrastructure.
Real applications in road infrastructure
The light ELBA 3S2-TL-LED/PC is used in many traffic control scenarios.
Urban intersections
Used to traffic traffic traffic semaphorisation in cities, ensuring controlled flow and road safety.
National and county roads
Ideal for intersections with intense traffic or areas with reduced visibility.
ITS system – Intelligent Transport Systems
It can be integrated into:
- adaptive traffic systems
- centralised management of traffic lights
- Automated road flow control
Temporary road works
It can also be used in Mobile traffic semaforisation systems for construction sites.
Commercial benefits for the customer
- very long life thanks to LED technology
- Low maintenance costs
- low energy consumption
- excellent visibility under any conditions
- weather and UV resistance
- compatibility with existing road infrastructure
- compliance with European standards
- simple and fast installation
FAQ – Frequently Asked Questions
What diameter has the light surface of the light?
The diameter of the light surface is Ø200 mm, standard size used in most urban intersections.
What kind of light source does the light light use?
The traffic light uses LED modules dedicated to road signalling, which offers reduced consumption and extended life span.
What's the power supply?
The supply voltage is 230V / 50Hz, compatible with standard electrical infrastructure.
What degree of protection does the traffic light have?
The traffic light offers IP65 for the LED module and IP56 for the traffic light body, which protects him against dust and water.
At what temperatures can it work?
The device works in the range -40°C to +60°CBeing suitable for extreme weather conditions.
Is it compatible with intelligent traffic systems?
Yeah. The light can be integrated into modern traffic management and centralised control systems.